Google+
Kategori Produk
Hubungi Kami

HUBUNGI KAMI :

+62 21 6023 4988

+62 812 1844 1575

+62 877 8863 1139

5462BABD

+62 877 8863 1139

cs@isound.id

info@isound.id

purchase@isound.id

Cara Pembayaran

Bank BNI
No. 0363-587-460
A/n. Fanny Usman

Bank Mandiri
No. 119-000-4633-663
A/n. Fanny Usman

Merk

 

 

 

Zapco DC-750.2

Zapco DC-750.2
Merk: Zapco
Kode Produk: Zapco DC-750.2
Ketersediaan: Ada
Harga: Rp6.000.000
Jumlah:  
   - atau -   

Zapco DC750.2 Reference

ZAPCO Reference Serie

Technische Daten:

Stereo, 4 ohms: 2 x 175 Watts
Stereo, 2 ohms: 2 x 360Watts
Bridged, 4 ohms: 2 x 780 Watts
T.H.D. + Noise: <0.04% @ 4 ohms
S/N Ratio: >90dB
Slew Rate: >40V/uS
Damping Factor: >1000 @ 4 ohms
Dimensions: 24.4"L x7.12"W x 2.35"H

This year ZAPCO introduces the DCS series of Reference amplifiers. This series shares the same platform as the analog Reference amps and the same power mix. This means lots of power and clean sound in both lines. The differences between the amps lie primarily in two areas. First, as the initials imply, the new series is digitally controlled. We know Zapco's not the first to do digital control?just the first to do it right. Each ZAPCO DCS amp features a USB input. This allows a PC to be hooked directly to the amp to set all functions. All functions can be set as stereo pairs or as individual channels. These DSP functions include:

1 - Output and input Gain
2 - Input mode: Rt, Lft, or Sum Mono
3 - Crossover mode: High Pass, Low pass, Band Pass
4 - Crossover Slope from 6 - 24dB
5 - Q-Bass Equalization
6 - Network Node Position
7 - Time Delay by both time and distance
8 - 10 bands of Parametric Equalization per Channel
Also available, is a half DIN controller to allow the settings to be made from the drivers seat without a computer. Also on each amp is a pair of RG connectors and a dip switch to "Address" the amp and "daisy chain" multiple amps. Once the amps are addressed you can use a single controller to operate up to 16 or more amplifiers. This allows you to set all functions of all amps in a system right from the driver's seat so you know how each adjustment affects the sound as you make it. Second, The DCS amps all feature our exclusive VRM circuitry which constantly compares the voltage rails to the output impedance. If the circuitry senses lower impedances it automatically adjusts the rail voltage to keep the amp in its power range between 4 ohms and 2 ohms. If the load remains below 2 ohms an LED will notify you to drop into the lower range where the amp will operate down to 1 ohm. Unlike other systems that simply turn down the gain, the VRM actually controls the operating voltage so the amp spends more time working at maximum efficiency.

Features:

 

2-Channel Amp with On-Board Digital Processing
-SymbiLink? Balanced Inputs
-On-Board, Full Function DSP
-Intelligent Rail Voltage Control
-Plays from ½ ohm to 4 ohm Stereo Loads
-USB Input for PC Control
-Optional DRC-SL In-Dash Remote Control
-Optional Digital Programming Network
-Ducted Flow Cooling
-Heavy-Duty, High-Current, Insulated Terminal Blocks
-Space Saving Flush Wiring Connections
-Heavy-Duty Mini ANL Fuse
-Bridgeable
-Three-Channel Capable
-Gate Drive Boost Circuit
-High-Current Bipolar Outputs
-Optically Isolated MOSFET Power Supply
-Quality ZAPCO construction

03.rockford
01,audison
04
2.Sony
Powered by ScientSys
www.iSound.id © 2018