Kategori Produk
Hubungi Kami


+62 21 6023 4988

+62 812 1844 1575

+62 877 8863 1139


+62 877 8863 1139

Cara Pembayaran

Bank BNI
No. 0363-587-460
A/n. Fanny Usman

Bank Mandiri
No. 119-000-4633-663
A/n. Fanny Usman





Helix DSP

Helix DSP
Helix DSP Helix DSP
Merk: Helix
Kode Produk: Helix DSP
Ketersediaan: Ada
Harga: Rp7.199.000
   - atau -   


Pertama DSP berdiri sendiri yang pantas disebut HELIX a. The HELIX DSP baru lebih dari meyakinkan bukti bahwa berisik, prosesor suara distorsi akhirnya sesuatu dari masa lalu. Spesifikasi teknis yang sangat baik digabungkan dengan paket fitur yang hampir tidak bisa lebih mengesankan dalam praktek yang sebenarnya. Intuitif operasi berkat antarmuka PC grafis jelas terstruktur memungkinkan setiap aneh suara ambisius untuk mengoptimalkan suara hampir semuanya.

  • Windows interface – communication via USB 2.0
  • MicroSD slot to upload DSP settings without having to connect the DSP to a PC
  • Special audio DSP with a resolution of 56 Bit – optimized for highest sound quality
  • Freely configurable inputs and outputs
  • Graphical 30-band EQ per channel with the “fine adjustment” of the individual bands in 1/24 octave steps and time correction in 7-mm steps, all established filter characteristics are available and much more
  • Inputs: 6 x RCA, 4 x high-level, 1 x optical, 1 x control input, MicroSD and USB
  • Outputs: 8 x RCA and remote output
  • Extremely compact dimensions: 40 x 177 x 120 mm

Power Save Mode
The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the amplifiers that are connected to the HELIX DSP once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after leaving the car! Once the “Power Save Mode is active the “Remote Output” and therefore the connected amplifiers will be turned off. The HELIX DSP will reactivate the “Remote Output” within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save made” via the PC-tool software.

Start-/Stop capability
The switched power supply of the HELIX DSP assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.

Automatic Digital Signal Detection
Switching from analog input to the digital input is done automatically as soon as an signal is detected on the optical input. This feature can be deactivated in the PC-tool software. Alternatively you can use the optional cable remote control URC 2A for manual switching between analog and digital inputs.


6 x RCA
4 x Highlevel speaker Input
1 x Optical SPDIF-Format (6-96 kHz Sampling Rate)
1 x Remote In

Input sensitivity

RCA/Cinch 4 Volts (internally adjustable) - default 4 Volts
Highlevel 5 - 9 Volts (intern. adjustable) - default 11 Volts
(corresponds to 6 - 30 Watts RMS - not max. power)

Outputs 8 x RCA
1 x Remote out
Output voltage Max. 4 Volts RMS
Frequency response 10 Hz - 22,000 Hz
DSP resolution 56 Bit
DSP processing power 172 MHz
DSP type Audio signal processor
Signal converter A/D: BurrBrown
D/A: BurrBrown

Signal-to-noise ratio - digital input

Signal-to-noise ratio - analog input

112 dB (A-weighted)

107 dB (A-weighted)

Total harmonic distortion (THD+N) - digital input

Total harmonic distortion (THD+N) - analog input

< 0.001 %

< 0.003 %

IM distortion (IMD) - digital input

IM distortion (IMD) - analog input

< 0.003 %

< 0.007 %


> 90 dB @ 10 kHz

Operating Voltage 9.2 - 18 Volts, short drops down to 6 Volts acceptable
Current draw < 450 mA
Dimensions (H x W x D) 40 x 177 x 120 mm / 1.6 x 7 x 4.75“


Tags: Helix DSP
Powered by ScientSys © 2018