Google+
Kategori Produk
Hubungi Kami

HUBUNGI KAMI :

+62 21 6023 4988

+62 812 1844 1575

+62 877 8863 1139

5462BABD

+62 877 8863 1139

cs@isound.id

info@isound.id

purchase@isound.id

Cara Pembayaran

Bank BNI
No. 0363-587-460
A/n. Fanny Usman

Bank Mandiri
No. 119-000-4633-663
A/n. Fanny Usman

Merk

 

 

 

JL Audio 12W7AE-3

JL Audio 12W7AE-3
JL Audio 12W7AE-3 JL Audio 12W7AE-3 JL Audio 12W7AE-3
Merk: JL Audio
Kode Produk: 12W7AE-3
Ketersediaan: Ada
Harga: Rp12.000.000
Jumlah:  
   - atau -   

12W7AE-3

10th Anniversary Edition - W7 12-inch Subwoofer Driver (1000 W, 3 Ω) 


The 12W7AE brings serious performance to the table by combining the breakthrough of the long-excursion W7 design with a large 12-inch bore. It has been called "addictive," "seductive" and "the new subwoofer reference", by some of the world's toughest reviewers, and has earned these accolades by delivering nearly limitless dynamics, exceptional balance and world-class sound quality.

This potent driver is best used with amplifier power in the 400W - 1000W range and is optimized to operate in a 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure

General Specifications

Table_Image
Continuous Power Handling (RMS) 1000 W
Recommended RMS Amplifier Power 400 - 1000 W
Nominal Impedance (Znom) 3 Ω

Physical Specifications

Table_Image
Nominal Diameter 12.0 in / 300 mm
Overall Diameter (A) 12.5 in / 318 mm
Mounting Hole Diameter (B) 10.5 in / 267 mm
Bolt Hole Circle (C) 11.27 in / 286 mm
Magnet Diameter (D) 7.5 in / 191 mm
Mounting Depth (E) 9.5 in / 241 mm
Driver Displacement 0.14 cu ft / 4.0 L
Net Weight 45 lb / 20.4 kg

Parameters

Free Air Resonance (Fs) 27.2 Hz
Electrical “Q” (Qes) 0.514
Mechanical “Q” (Qms) 7.807
Total Speaker “Q” (Qts) 0.482
Equivalent Compliance (Vas) 2.33 cu ft / 66.0 L
One-Way Linear Excursion (Xmax)* 1.15 in / 29 mm
Reference Efficiency (no) 0.2500%
Efficiency (1 W / 1 m)** 86.2 dB SPL
Effective Piston Area (Sd) 84 sq in / 0.0542 sq m
DC Resistance (Re) 2.47 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

Sealed Enclosure Specifications

Table_Image
Wall Thickness 0.75 in / 19 mm
Front Baffle Thickness 1.0 in / 25 mm
Volume (net int.) 1.375 cu ft / 38.94 L
External Width (W) 15 in / 381 mm
External Height (H) 15 in / 381 mm
External Depth (D) 16.125 in / 410 mm
F3 40.4 Hz
Fc 44.7 Hz
Qtc 0.791
Enclosure Notes

Net volumes given above do not include the air volume displaced by the speaker (Driver Displacement). This value must be added to the net volume along with the displacement of any braces and/or ports (if applicable) to arrive at a gross internal volume. Air inside a port is not part of the effective net volume. Calculate ports as solid, not hollow objects.

* The W7’s employ a pole vent to remove heat and pressure from the inside of the speaker.This vent is located around the JL Audio badge at the rear of the speaker. A minimum distance of 0.75 in (19 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent.

The dimensions given for the enclosure examples above take all applicable displacements into consideration

Safety Notice

It is absolutely essential that the completed subwoofer enclosure is mounted firmly to the vehicle with heavy steel bolts (0.5 in diameter) and large steel washers on both sides of the bolts. This will reduce the likelihood of occupant injury in the event of a collision or sudden deceleration.

Ported Enclosure Specifications

Table_Image
Wall Thickness 0.75 in / 19 mm
Front Baffle Thickness 1.0 in / 25 mm
Volume (net int.) 1.75 cu ft / 49.6 L
External Width (W) 22.75 in / 578 mm
External Height (H) 15 in / 381 mm
External Depth (D) 15.875 in / 403 mm
Internal Slot Port Width (SW) 1.875 in / 403 mm
Internal Slot Port Height (SH) 13.5 in / 343 mm
Internal Slot Port Depth (SD) 24.75 in / 629 mm
Port Extension Length (EL) 7.9375 in / 202 mm
Tune to 36.7 Hz
F3 32.8 Hz
Enclosure Notes

Net volumes given above do not include the air volume displaced by the speaker (Driver Displacement). This value must be added to the net volume along with the displacement of any braces and/or ports (if applicable) to arrive at a gross internal volume. Air inside a port is not part of the effective net volume. Calculate ports as solid, not hollow objects.

* The W7’s employ a pole vent to remove heat and pressure from the inside of the speaker.This vent is located around the JL Audio badge at the rear of the speaker. A minimum distance of 0.75 in (19 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent.

The dimensions given for the enclosure examples above take all applicable displacements into consideration

Safety Notice

It is absolutely essential that the completed subwoofer enclosure is mounted firmly to the vehicle with heavy steel bolts (0.5 in diameter) and large steel washers on both sides of the bolts. This will reduce the likelihood of occupant injury in the event of a collision or sudden deceleration.

 

Tags:
03.rockford
01,audison
04
2.Sony
Powered by ScientSys
www.iSound.id © 2017